According to recent studies, 5 percent of all motor vehicle fatalities are clearly caused by automobile maintenance neglect.
The cooling system should be completely flushed and refilled about every 24 months. The level, condition, and concentration of coolant should be checked. (A 50/50 mix of anti-freeze and water is usually recommended.)
Zion Motors in St. George now provides the Jasper Engines re-manufactured Toyota A750E (RWD) and A750F (4WD) transmissions. These transmissions are available for the 2004-2011 Toyota Tundra, Sequoia, Tacoma, 4 Runner, and FJ Cruiser transmission replacements
Each JASPER remanufactured Toyota A750E and A750F transmission is 100% dynamometer tested using a state of the art dyno software package eliminating the chance of shifting concerns and ensures a quality product for the customer. All wear areas of the valve body are reamed to oversize, where applicable, and vacuum-tested to restore the hydraulic integrity of the unit reducing the chance of low fluid pressure within the transmission, causing slipped clutches.
In addition to the value-added quality re-manufacturing steps to provide a perfect product, great care is taken to ensure each A750E and A750F transmission replacement option can stand up to the rigors of everyday life. Each transmission receives 100% new friction plates from the OE manufacturer to retain shift quality and durability. Converter linings are 100% replaced to reduce lock-up shudder and solenoids are 100% tested to verify proper operation before they are installed in the transmission.
The JASPER remanufactured Toyota A750E and A750F transmission is covered by a three-year, 100,000 mile, nationwide parts, and labor warranty. Talk to our team at Zion Motors in St. George about your specific needs and any transmission replacement questions you might have for your Toyota, we'd be happy to answer them for you and see if a JASPER remanufactured transmission is right for you.
Zion Motors in St. George is pleased to offer the remanufactured Holset HE351VE turbocharger to our customers for 2007 and current Cummins 6.7L diesel engine applications. Each JASPER remanufactured Cummins 6.7L Holset turbo undergoes a three-step balancing process. The turbine shaft/wheel assembly, and the compressor wheel, are individually balanced on a component balancer. The rotating assembly, or center section, is then balanced on a high-speed VSR machine. The center section is balanced at over 70,000 RPM. They verify balance is at .05 grams per square inch or below for best operation and improved turbo life.
Zion Motors in St. George is pleased to announce their newest product lines available for diesel engines: Re-manufactured International MaxxForce DT Complete Diesel Engine.
Zion Motors in St. George now offers the JASPER Re-manufactured Nissan VQ40DE 4.0L DOHC Engine! Jasper Engines & Transmissions, the nation’s leader in remanufactured products, announces the availability of its re-manufactured Nissan VQ40DE 4.0L engine. This DOHC V6 engine is available in exchange for the following 2006-2011 vehicles: Nissan Frontier, Pathfinder, X-terra offering several advantages:
JASPER Engines & Transmissions understands the pride and satisfaction that accompanies classic car ownership. Our staff of the JASPER Authentic Custom Drivetrains Division shares the same feelings in the quality of their work, making sure that you are satisfied with every detail of this exciting experience.
We offer custom remanufacturing for gas engines, transmissions, and differentials. Authentic JASPER gas engines include a numbers-matching build, original paint, testing, and, upon request and for an additional charge, valuable documentation of the remanufacturing process. With experience dating back to 1942, the latest technology, and our passion for perfection, you can expect only the best from a Jasper Authentic Custom drivetrain.
Zion Motors in St. George now is able to provide GM front axles for 4WD & AWD vehicles solving the issues of many vehicles ranging from 2002 models to 2009 models. Our supplier, Jasper Engines & Transmissions, the nation’s leader in re-manufactured drive train products, is offering complete re-manufactured GM front axle actuator assemblies for 4WD and AWD late-model SUVs.
These actuator assemblies fit the following vehicles: